Buy café.be ?
We are moving the project
café.be .
Are you interested in purchasing the domain
café.be ?
domain@kv-gmbh.de · 0541-91531010
Buy café.be ?
Are the Segafredo Intermezzo coffee beans more suitable for an espresso or for a café crema?
Segafredo Intermezzo coffee beans are more suitable for an espresso. These beans are specifically blended to create a rich and intense flavor, which is ideal for making a strong and bold espresso. The beans are roasted to perfection to bring out the deep and complex flavors that are characteristic of a classic espresso. Therefore, if you are looking to make a delicious and authentic espresso, the Segafredo Intermezzo coffee beans would be the perfect choice. **
Is it worth opening a café with coffee, pastries, and similar items, and how much does it cost to open one approximately?
Opening a café with coffee, pastries, and similar items can be worth it if there is a demand for such a business in the area. It can be a profitable venture if the location is good and the quality of the products is high. The cost to open a café can vary greatly depending on factors such as location, size, equipment, and renovations. However, a rough estimate for opening a small café can range from $50,000 to $300,000, including expenses for rent, equipment, supplies, and initial marketing. **
B2 Audio Riot 6P
The Riot 6P from B2 Audio is a 6.5 inch (16.5 cm) mid-bass speaker with 100 W RMS and 200 W maximum power handling. The nominal impedance is 4 Ohms, and the voice coil measures 38.6 mm (1.5 inches). The frequency response ranges from 140 Hz to 14 kHz with a sensitivity of 92 dB. The Thiele & Small parameters include a free-air resonance frequency of 140 Hz, a total Q factor of 1.0, an equivalent volume of 4 L, and a maximum displacement of 3.5 mm. The efficiency is rated at 1%. Additional parameters: DC resistance 3.8 Ohms, mechanical Q factor 11, electrical Q factor 1.1, BL factor 4.7 TM, and moving mass 8 g. The magnet weighs 652 g. The dimensions include a total diameter of 168 mm, a mounting depth of 83 mm, a mounting diameter of 158 mm, and a front mounting hole of 145 mm. Features 6.5 inch (16.5 cm) mid-bass speaker RMS power: 100 W Maximum power: 200 W Nominal impedance: 4 Ohms Voice coil diameter: 38.6 mm (1.5 inches) Frequency response: 140 Hz – 14 kHz Sensitivity: 92 dB Total diameter: 168 mm Mounting depth: 83 mm Mounting diameter: 158 mm Front mounting hole: 145 mm Magnet weight: 652 g Technical Specifications Free-air resonance frequency (Fs): 140 Hz DC resistance (Re): 3.8 Ohms Mechanical Q factor (Qms): 11 Electrical Q factor (Qes): 1.1 Total Q factor (Qts): 1.0 Equivalent volume (Vas): 4 L Efficiency: 1 % BL factor (BL): 4.7 TM Moving mass (Mms): 8 g Maximum displacement (Xmax): 3.5 mm
132,93 €*
Shipping: 12,16 €
Secure redirect to the provider
B2 Audio Riot 1800.4RGB
The Riot 1800.4RGB from B2 Audio is a 4-Channel Amplifier with a HI-EF Class D circuit configuration. The continuous output power is 4 x 300 W RMS at 4 Ohms and 4 x 450 W RMS at 2 Ohms. In bridged mode at 4 Ohms, it achieves 2 x 900 W RMS. The device has compact dimensions of 35.56 x 12.51 x 5.69 cm. A frequency response of 10 Hz to 40 KHz and a signal-to-noise ratio of over 90 dB are technical cornerstones. The operating voltage ranges from 10 V to 16 V with a fuse rating of 150 A. The power connection is designed for 50mm². Features 4-Channel Amplifier HI-EF Class D circuit configuration Continuous output power (RMS) at 4 Ohms: 4 x 300 W Continuous output power (RMS) at 2 Ohms: 4 x 450 W Continuous output power (RMS) in bridged mode at 4 Ohms: 2 x 900 W Dimensions: 35.56 x 12.51 x 5.69 cm Power connection: 50mm² Operating voltage: 10 V - 16 V Fuse rating: 150 A Technical Specifications Frequency response: 10 Hz - 40 KHz (-3 DB) Signal-to-noise ratio: >90 DB Input sensitivity: 6 V - 0.4 V High-level input: 10 V - 0.8 V Crossover circuit: 12 dB/OCT Low-pass crossover: 50 Hz - 5 KHz High-pass crossover: 50 Hz - 5 KHz
401,65 €*
Shipping: 0,00 €
Secure redirect to the provider
Similar search terms for B2-Audio-Riot-6P
Top-Angebote
Products related to B2-Audio-Riot-6P:
-
B2 Audio Riot 2500.1RGBThe Riot 2500.1RGB from B2 Audio is a 1-Channel Amplifier with a continuous power output of up to 2500 Watts RMS at 1 Ohm and 14.4 V. The device uses a HI-EF Class D circuit configuration and covers a frequency range of 10 Hz to 250 Hz. The dimensions are 37.2 x 12.5 x 5.7 cm with an operating voltage of 10 V to 16 V. Features include various crossover options such as a low-pass crossover from 50 Hz to 250 Hz and a subsonic crossover from 10 Hz to 50 Hz. A level controller with clip indicator is included. The input sensitivity is adjustable between 6 V and 0.2 V, while the high-level input covers a range of 10 V to 0.6 V. Features 1-Channel Amplifier Continuous output power (RMS) at 4 Ohm: 800 W Continuous output power (RMS) at 2 Ohm: 1400 W Continuous output power (RMS) at 1 Ohm: 2500 W Circuit configuration: HI-EF Class D Dimensions: 37.2 x 12.5 x 5.7 cm Level controller with clip included Bass Boost: 0-12 DB Phase control: 0-180 degrees Technical Specifications Frequency response: 10 Hz - 250 Hz Signal-to-noise ratio: >90 DB Input sensitivity: 6 V - 0.2 V High-level input: 10 V - 0.6 V Crossover circuit: 12 DB/OCT Low-pass crossover: 50 Hz - 250 Hz Subsonic crossover: 10 Hz - 50 Hz Operating voltage: 10 V - 16 V Fuse rating: 200 A401,65 €*Shipping: 0,00 €Secure redirect to the provider
-
B2 Audio Rage 6P V4The Rage 6P V4 from B2 Audio is a 6.5 inch (16.5 cm) mid-bass speaker with 120 Watts RMS and 240 Watts Max at 4 Ohm impedance. The sensitivity is 95.7 dB (1 W/2.83 V), the frequency range extends from 94 Hz to 6 kHz, and the resonance frequency Fs is at 94 Hz. Other parameters: DC resistance 3.6 Ohm, Qes 0.65, Qms 13.5, Qts 0.62, Vas 5.4 l, and Bl 6.3 Tm. Design with 25 ounce magnet and 1.5 inch voice coil. Mounting depth 6.5 cm, mounting diameter 14.5 cm, outer diameter 16.5 cm. Features 6.5 inch (16.5 cm) mid-bass speaker Impedance: 4 Ohm RMS power: 120 Watts Max power: 240 Watts Sensitivity: 95.7 dB (1 W/2.83 V) Frequency range: 94 Hz to 6 kHz Magnet: 25 ounces Mounting depth: 6.5 cm Mounting diameter: 14.5 cm Outer diameter: 16.5 cm Technical Specifications DC resistance: 3.6 Ohm Fs: 94 Hz Qes: 0.65 Qms: 13.5 Qts: 0.62 Vas: 5.4 l Bl: 6.3 Tm Voice coil: 38.1 mm89,59 €*Shipping: 13,28 €Secure redirect to the provider
-
B2 Audio B2 US TEEA true expression of modern style, the B2 US TEE from B2 Audio is much more than just a dress code. This T-shirt merges lifestyle and enthusiasm into a comfortable wearing experience. Its unmistakable trademark, an artistically torn US flag, adds a special touch to any outfit. With its remarkable quality and high wearing comfort, it stands out from the crowd. Show your fashion awareness and become part of the trend with this exclusive T-shirt. Features Sizes: M / L / XL / XXL / 3XL / 4XL 100% Cotton21,39 €*Shipping: 11,74 €Secure redirect to the provider
-
B2 Audio Rage 2300.2The Rage 2300.2 is a 2-Channel Amplifier from B2 Audio in Class D. The output power is 2 x 650 WRMS at 4 Ω 14.4 V, 2 x 1150 WRMS at 2 Ω 14.4 V, and 1 x 2300 WRMS bridged at 4 Ω 14.4 V. The frequency response ranges from 10 Hz to 27 KHz. The signal-to-noise ratio is greater than 95 dB, and the damping factor is greater than 200. The input sensitivity ranges from 5 V to 0.2 V. A low-pass filter of 24 dB/Oct.: 50 Hz to 5 KHz and a high-pass filter of 24 dB/Oct.: 30 Hz to 5 KHz are integrated. The power supply is via a 70 mm² input, and the fuse rating is 250 A. The operating voltage is between 9 V and 16 V, and the dimensions are 305 x 200 x 70 mm. Features 2-Channel Amplifier Class D Power at 4 Ω 14.4 V: 2 x 650 WRMS Power at 2 Ω 14.4 V: 2 x 1150 WRMS Power at 4 Ω 14.4 V Bridge: 1 x 2300 WRMS Frequency response: 10 Hz ~ 27 KHz Signal-to-noise ratio: > 95 dB Damping factor: >200 Dimensions: 305 x 200 x 70 mm Technical Specifications Input power supply: 70 mm² Input sensitivity: 5 V ~ 0.2 V Low-pass filter 24 dB/Oct.: 50 Hz ~ 5 KHz High-pass filter 24 dB/Oct.: 30 Hz ~ 5 KHz Fuse rating: 250 A Operating voltage: 9 V ~ 16 V703,64 €*Shipping: 0,00 €Secure redirect to the provider
B2 Audio Rage 1600.5
The Rage 1600.5 is a 5-Channel Amplifier from B2 Audio with power ratings at 14.4 V of 4 x 80 WRMS and 1 x 350 WRMS at 4 Ohm, 4 x 125 WRMS and 1 x 600 WRMS at 2 Ohm, as well as 2 x 250 WRMS and 1 x 1150 WRMS bridged at 4 Ohm. The frequency response ranges from 10 Hz to 27 kHz on CH1–CH4 and 10 Hz to 250 Hz on CH5. Filter options include a 24 dB/Oct. low-pass filter from 50 Hz to 5 kHz (CH1–CH4) and 35 Hz to 250 Hz (CH5), a 24 dB/Oct. high-pass filter from 30 Hz to 5 kHz, and a subsonic crossover on CH5 from 10 Hz to 50 Hz. The signal-to-noise ratio is over 95 dB, the input sensitivity is from 0.2 V to 5 V, and the damping factor is over 200. The phase is adjustable from 0 to 180°, the operating voltage is from 9 V to 16 V, and the fuse rating is 150 A. The input power supply is designed for 50 mm², and the dimensions are 425 x 200 x 70 mm. Features 5-Channel Amplifier Power at 4 Ohm 14.4 V: 4 x 80 WRMS Power at 4 Ohm 14.4 V: 1 x 350 WRMS Power at 2 Ohm 14.4 V: 4 x 125 WRMS Power at 2 Ohm 14.4 V: 1 x 600 WRMS Power at 4 Ohm bridged 14.4 V: 2 x 250 WRMS Power at 4 Ohm bridged 14.4 V: 1 x 1150 WRMS Frequency response CH1–CH4: 10 Hz to 27 kHz Frequency response CH5: 10 Hz to 250 Hz Low-pass filter 24 dB/Oct.: 50 Hz to 5 kHz (CH1–CH4) Low-pass filter 24 dB/Oct.: 35 Hz to 250 Hz (CH5) High-pass filter 24 dB/Oct.: 30 Hz to 5 kHz Subsonic crossover CH5: 10 Hz to 50 Hz Operating voltage: 9 V to 16 V Fuse rating: 150 A Input power supply: 50 mm² Dimensions: 425 x 200 x 70 mm Technical Specifications Signal-to-noise ratio: >95 dB Input voltage sensitivity: 0.2 V to 5 V Damping factor: >200 Phase: 0–180°
804,30 €*
Shipping: 0,00 €
Secure redirect to the provider
B2 Audio RAVE12 D4
The RAVE12 D4 from B2 Audio is a 12-inch Subwoofer that stands for impressive performance and versatility. With a power handling of 500 Watts RMS and 1000 Watts Max, it is ideal for musical and bass-heavy sound systems. The Subwoofer is designed in a compact shallow-mount construction, making it perfect for space-saving installations. Thanks to the dual 4 Ohm voice coil, it offers flexible impedance options of 2 Ohm or 8 Ohm. The RAVE12 D4 covers an extremely wide frequency range from 10 to 500 Hz, making it suitable for deep sub-bass as well as punchy kick bass. With a sensitivity of 89.3 dB, it generates a high sound pressure even at moderate power levels, while being optimally tuned for use in compact, vented enclosures starting from 43.2 liters. Highlights Powerful & Efficient: Rated for 500 Watts RMS (1000 Watts Max) for musical and bass-heavy sound systems Compact Shallow-Mount Design: Flat shallow-mount subwoofer that is ideal for extremely space-saving installations Versatile Impedance: Dual 4 Ohm voice coil allows for flexible configurations at either 2 Ohm or 8 Ohm total impedance Extremely Wide Frequency Range: Covers a range from 10 Hz to 500 Hz, making it suitable for both deep sub-bass and punchy kick bass High Efficiency: With a sensitivity of 89.3 dB, the subwoofer generates significant sound pressure even at moderate amplifier power Perfect for Bass Reflex Enclosures: Specifically optimized for excellent performance in compact, vented enclosures starting from 43.2 liters Technical Specifications Model: B2 Audio RAVE12-D4 Subwoofer Type: Shallow Mount Subwoofer Chassis Size: 12 inches Nominal Impedance: Dual 4 Ohm (DVC) Continuous Power Handling: 500 W RMS Peak Power Handling: 1000 W Max Frequency Range: 10 – 500 Hz Sound Pressure Level: 89.3 dB (1W/1m) Voice Coil: 63.5 mm (2.5 inches) round copper wire Magnet Type: Ferrite Motor Weight: 3.97 kg Diaphragm Material: Natural Polypropylene (NPP) Surround Type: Narrow U-Shape foam surround Connections: Push terminals for cables up to 10 mm² Weight: 5.5 kg Electro-Acoustic Parameters (TSP) Resonance Frequency (Fs): 31.8 Hz Equivalent Volume (Vas): 80 l DC Resistance in Parallel (Re): 1.9 Ohm Total Quality Factor (Qts): 0.425 Electrical Quality Factor (Qes): 0.48 Mechanical Quality Factor (Qms): 3.57 Effective Moving Mass (Mms): 114 g Suspension Compliance (Cms): 22 µm/N Maximum Linear Excursion (Xmax): 12 mm (one way) Effective Diaphragm Area (Sd): 510 cm² Inductance (Le): 1.02 mH EBP: 66 Enclosure Recommendations (Bass Reflex) Compact Bass Reflex Enclosure: 43.2 liters (Tuning: 35 Hz) Standard Bass Reflex Enclosure: 50 liters (Tuning: 35 Hz) Installation Dimensions Overall Diameter: 318 mm Cutout Diameter: 282 mm Mounting Depth: 142 mm Overall Depth: 152 mm Magnet Diameter: 140 mm Magnet Depth: 56 mm
99,66 €*
Shipping: 16,50 €
Secure redirect to the provider
Top-Angebote
Products related to B2-Audio-Riot-6P:
-
B2 Audio Riot 6PThe Riot 6P from B2 Audio is a 6.5 inch (16.5 cm) mid-bass speaker with 100 W RMS and 200 W maximum power handling. The nominal impedance is 4 Ohms, and the voice coil measures 38.6 mm (1.5 inches). The frequency response ranges from 140 Hz to 14 kHz with a sensitivity of 92 dB. The Thiele & Small parameters include a free-air resonance frequency of 140 Hz, a total Q factor of 1.0, an equivalent volume of 4 L, and a maximum displacement of 3.5 mm. The efficiency is rated at 1%. Additional parameters: DC resistance 3.8 Ohms, mechanical Q factor 11, electrical Q factor 1.1, BL factor 4.7 TM, and moving mass 8 g. The magnet weighs 652 g. The dimensions include a total diameter of 168 mm, a mounting depth of 83 mm, a mounting diameter of 158 mm, and a front mounting hole of 145 mm. Features 6.5 inch (16.5 cm) mid-bass speaker RMS power: 100 W Maximum power: 200 W Nominal impedance: 4 Ohms Voice coil diameter: 38.6 mm (1.5 inches) Frequency response: 140 Hz – 14 kHz Sensitivity: 92 dB Total diameter: 168 mm Mounting depth: 83 mm Mounting diameter: 158 mm Front mounting hole: 145 mm Magnet weight: 652 g Technical Specifications Free-air resonance frequency (Fs): 140 Hz DC resistance (Re): 3.8 Ohms Mechanical Q factor (Qms): 11 Electrical Q factor (Qes): 1.1 Total Q factor (Qts): 1.0 Equivalent volume (Vas): 4 L Efficiency: 1 % BL factor (BL): 4.7 TM Moving mass (Mms): 8 g Maximum displacement (Xmax): 3.5 mm132,93 €*Shipping: 12,16 €Secure redirect to the provider
-
B2 Audio Riot 1800.4RGBThe Riot 1800.4RGB from B2 Audio is a 4-Channel Amplifier with a HI-EF Class D circuit configuration. The continuous output power is 4 x 300 W RMS at 4 Ohms and 4 x 450 W RMS at 2 Ohms. In bridged mode at 4 Ohms, it achieves 2 x 900 W RMS. The device has compact dimensions of 35.56 x 12.51 x 5.69 cm. A frequency response of 10 Hz to 40 KHz and a signal-to-noise ratio of over 90 dB are technical cornerstones. The operating voltage ranges from 10 V to 16 V with a fuse rating of 150 A. The power connection is designed for 50mm². Features 4-Channel Amplifier HI-EF Class D circuit configuration Continuous output power (RMS) at 4 Ohms: 4 x 300 W Continuous output power (RMS) at 2 Ohms: 4 x 450 W Continuous output power (RMS) in bridged mode at 4 Ohms: 2 x 900 W Dimensions: 35.56 x 12.51 x 5.69 cm Power connection: 50mm² Operating voltage: 10 V - 16 V Fuse rating: 150 A Technical Specifications Frequency response: 10 Hz - 40 KHz (-3 DB) Signal-to-noise ratio: >90 DB Input sensitivity: 6 V - 0.4 V High-level input: 10 V - 0.8 V Crossover circuit: 12 dB/OCT Low-pass crossover: 50 Hz - 5 KHz High-pass crossover: 50 Hz - 5 KHz401,65 €*Shipping: 0,00 €Secure redirect to the provider
-
B2 Audio Riot 2500.1RGBThe Riot 2500.1RGB from B2 Audio is a 1-Channel Amplifier with a continuous power output of up to 2500 Watts RMS at 1 Ohm and 14.4 V. The device uses a HI-EF Class D circuit configuration and covers a frequency range of 10 Hz to 250 Hz. The dimensions are 37.2 x 12.5 x 5.7 cm with an operating voltage of 10 V to 16 V. Features include various crossover options such as a low-pass crossover from 50 Hz to 250 Hz and a subsonic crossover from 10 Hz to 50 Hz. A level controller with clip indicator is included. The input sensitivity is adjustable between 6 V and 0.2 V, while the high-level input covers a range of 10 V to 0.6 V. Features 1-Channel Amplifier Continuous output power (RMS) at 4 Ohm: 800 W Continuous output power (RMS) at 2 Ohm: 1400 W Continuous output power (RMS) at 1 Ohm: 2500 W Circuit configuration: HI-EF Class D Dimensions: 37.2 x 12.5 x 5.7 cm Level controller with clip included Bass Boost: 0-12 DB Phase control: 0-180 degrees Technical Specifications Frequency response: 10 Hz - 250 Hz Signal-to-noise ratio: >90 DB Input sensitivity: 6 V - 0.2 V High-level input: 10 V - 0.6 V Crossover circuit: 12 DB/OCT Low-pass crossover: 50 Hz - 250 Hz Subsonic crossover: 10 Hz - 50 Hz Operating voltage: 10 V - 16 V Fuse rating: 200 A401,65 €*Shipping: 0,00 €Secure redirect to the provider
-
B2 Audio Rage 6P V4The Rage 6P V4 from B2 Audio is a 6.5 inch (16.5 cm) mid-bass speaker with 120 Watts RMS and 240 Watts Max at 4 Ohm impedance. The sensitivity is 95.7 dB (1 W/2.83 V), the frequency range extends from 94 Hz to 6 kHz, and the resonance frequency Fs is at 94 Hz. Other parameters: DC resistance 3.6 Ohm, Qes 0.65, Qms 13.5, Qts 0.62, Vas 5.4 l, and Bl 6.3 Tm. Design with 25 ounce magnet and 1.5 inch voice coil. Mounting depth 6.5 cm, mounting diameter 14.5 cm, outer diameter 16.5 cm. Features 6.5 inch (16.5 cm) mid-bass speaker Impedance: 4 Ohm RMS power: 120 Watts Max power: 240 Watts Sensitivity: 95.7 dB (1 W/2.83 V) Frequency range: 94 Hz to 6 kHz Magnet: 25 ounces Mounting depth: 6.5 cm Mounting diameter: 14.5 cm Outer diameter: 16.5 cm Technical Specifications DC resistance: 3.6 Ohm Fs: 94 Hz Qes: 0.65 Qms: 13.5 Qts: 0.62 Vas: 5.4 l Bl: 6.3 Tm Voice coil: 38.1 mm89,59 €*Shipping: 13,28 €Secure redirect to the provider
-
Are the Segafredo Intermezzo coffee beans more suitable for an espresso or for a café crema?
Segafredo Intermezzo coffee beans are more suitable for an espresso. These beans are specifically blended to create a rich and intense flavor, which is ideal for making a strong and bold espresso. The beans are roasted to perfection to bring out the deep and complex flavors that are characteristic of a classic espresso. Therefore, if you are looking to make a delicious and authentic espresso, the Segafredo Intermezzo coffee beans would be the perfect choice. **
-
Is it worth opening a café with coffee, pastries, and similar items, and how much does it cost to open one approximately?
Opening a café with coffee, pastries, and similar items can be worth it if there is a demand for such a business in the area. It can be a profitable venture if the location is good and the quality of the products is high. The cost to open a café can vary greatly depending on factors such as location, size, equipment, and renovations. However, a rough estimate for opening a small café can range from $50,000 to $300,000, including expenses for rent, equipment, supplies, and initial marketing. **
Similar search terms for B2-Audio-Riot-6P
-
B2 Audio B2 US TEEA true expression of modern style, the B2 US TEE from B2 Audio is much more than just a dress code. This T-shirt merges lifestyle and enthusiasm into a comfortable wearing experience. Its unmistakable trademark, an artistically torn US flag, adds a special touch to any outfit. With its remarkable quality and high wearing comfort, it stands out from the crowd. Show your fashion awareness and become part of the trend with this exclusive T-shirt. Features Sizes: M / L / XL / XXL / 3XL / 4XL 100% Cotton21,39 €*Shipping: 11,74 €Secure redirect to the provider
-
B2 Audio Rage 2300.2The Rage 2300.2 is a 2-Channel Amplifier from B2 Audio in Class D. The output power is 2 x 650 WRMS at 4 Ω 14.4 V, 2 x 1150 WRMS at 2 Ω 14.4 V, and 1 x 2300 WRMS bridged at 4 Ω 14.4 V. The frequency response ranges from 10 Hz to 27 KHz. The signal-to-noise ratio is greater than 95 dB, and the damping factor is greater than 200. The input sensitivity ranges from 5 V to 0.2 V. A low-pass filter of 24 dB/Oct.: 50 Hz to 5 KHz and a high-pass filter of 24 dB/Oct.: 30 Hz to 5 KHz are integrated. The power supply is via a 70 mm² input, and the fuse rating is 250 A. The operating voltage is between 9 V and 16 V, and the dimensions are 305 x 200 x 70 mm. Features 2-Channel Amplifier Class D Power at 4 Ω 14.4 V: 2 x 650 WRMS Power at 2 Ω 14.4 V: 2 x 1150 WRMS Power at 4 Ω 14.4 V Bridge: 1 x 2300 WRMS Frequency response: 10 Hz ~ 27 KHz Signal-to-noise ratio: > 95 dB Damping factor: >200 Dimensions: 305 x 200 x 70 mm Technical Specifications Input power supply: 70 mm² Input sensitivity: 5 V ~ 0.2 V Low-pass filter 24 dB/Oct.: 50 Hz ~ 5 KHz High-pass filter 24 dB/Oct.: 30 Hz ~ 5 KHz Fuse rating: 250 A Operating voltage: 9 V ~ 16 V703,64 €*Shipping: 0,00 €Secure redirect to the provider
-
B2 Audio Rage 1600.5The Rage 1600.5 is a 5-Channel Amplifier from B2 Audio with power ratings at 14.4 V of 4 x 80 WRMS and 1 x 350 WRMS at 4 Ohm, 4 x 125 WRMS and 1 x 600 WRMS at 2 Ohm, as well as 2 x 250 WRMS and 1 x 1150 WRMS bridged at 4 Ohm. The frequency response ranges from 10 Hz to 27 kHz on CH1–CH4 and 10 Hz to 250 Hz on CH5. Filter options include a 24 dB/Oct. low-pass filter from 50 Hz to 5 kHz (CH1–CH4) and 35 Hz to 250 Hz (CH5), a 24 dB/Oct. high-pass filter from 30 Hz to 5 kHz, and a subsonic crossover on CH5 from 10 Hz to 50 Hz. The signal-to-noise ratio is over 95 dB, the input sensitivity is from 0.2 V to 5 V, and the damping factor is over 200. The phase is adjustable from 0 to 180°, the operating voltage is from 9 V to 16 V, and the fuse rating is 150 A. The input power supply is designed for 50 mm², and the dimensions are 425 x 200 x 70 mm. Features 5-Channel Amplifier Power at 4 Ohm 14.4 V: 4 x 80 WRMS Power at 4 Ohm 14.4 V: 1 x 350 WRMS Power at 2 Ohm 14.4 V: 4 x 125 WRMS Power at 2 Ohm 14.4 V: 1 x 600 WRMS Power at 4 Ohm bridged 14.4 V: 2 x 250 WRMS Power at 4 Ohm bridged 14.4 V: 1 x 1150 WRMS Frequency response CH1–CH4: 10 Hz to 27 kHz Frequency response CH5: 10 Hz to 250 Hz Low-pass filter 24 dB/Oct.: 50 Hz to 5 kHz (CH1–CH4) Low-pass filter 24 dB/Oct.: 35 Hz to 250 Hz (CH5) High-pass filter 24 dB/Oct.: 30 Hz to 5 kHz Subsonic crossover CH5: 10 Hz to 50 Hz Operating voltage: 9 V to 16 V Fuse rating: 150 A Input power supply: 50 mm² Dimensions: 425 x 200 x 70 mm Technical Specifications Signal-to-noise ratio: >95 dB Input voltage sensitivity: 0.2 V to 5 V Damping factor: >200 Phase: 0–180°804,30 €*Shipping: 0,00 €Secure redirect to the provider
-
B2 Audio RAVE12 D4The RAVE12 D4 from B2 Audio is a 12-inch Subwoofer that stands for impressive performance and versatility. With a power handling of 500 Watts RMS and 1000 Watts Max, it is ideal for musical and bass-heavy sound systems. The Subwoofer is designed in a compact shallow-mount construction, making it perfect for space-saving installations. Thanks to the dual 4 Ohm voice coil, it offers flexible impedance options of 2 Ohm or 8 Ohm. The RAVE12 D4 covers an extremely wide frequency range from 10 to 500 Hz, making it suitable for deep sub-bass as well as punchy kick bass. With a sensitivity of 89.3 dB, it generates a high sound pressure even at moderate power levels, while being optimally tuned for use in compact, vented enclosures starting from 43.2 liters. Highlights Powerful & Efficient: Rated for 500 Watts RMS (1000 Watts Max) for musical and bass-heavy sound systems Compact Shallow-Mount Design: Flat shallow-mount subwoofer that is ideal for extremely space-saving installations Versatile Impedance: Dual 4 Ohm voice coil allows for flexible configurations at either 2 Ohm or 8 Ohm total impedance Extremely Wide Frequency Range: Covers a range from 10 Hz to 500 Hz, making it suitable for both deep sub-bass and punchy kick bass High Efficiency: With a sensitivity of 89.3 dB, the subwoofer generates significant sound pressure even at moderate amplifier power Perfect for Bass Reflex Enclosures: Specifically optimized for excellent performance in compact, vented enclosures starting from 43.2 liters Technical Specifications Model: B2 Audio RAVE12-D4 Subwoofer Type: Shallow Mount Subwoofer Chassis Size: 12 inches Nominal Impedance: Dual 4 Ohm (DVC) Continuous Power Handling: 500 W RMS Peak Power Handling: 1000 W Max Frequency Range: 10 – 500 Hz Sound Pressure Level: 89.3 dB (1W/1m) Voice Coil: 63.5 mm (2.5 inches) round copper wire Magnet Type: Ferrite Motor Weight: 3.97 kg Diaphragm Material: Natural Polypropylene (NPP) Surround Type: Narrow U-Shape foam surround Connections: Push terminals for cables up to 10 mm² Weight: 5.5 kg Electro-Acoustic Parameters (TSP) Resonance Frequency (Fs): 31.8 Hz Equivalent Volume (Vas): 80 l DC Resistance in Parallel (Re): 1.9 Ohm Total Quality Factor (Qts): 0.425 Electrical Quality Factor (Qes): 0.48 Mechanical Quality Factor (Qms): 3.57 Effective Moving Mass (Mms): 114 g Suspension Compliance (Cms): 22 µm/N Maximum Linear Excursion (Xmax): 12 mm (one way) Effective Diaphragm Area (Sd): 510 cm² Inductance (Le): 1.02 mH EBP: 66 Enclosure Recommendations (Bass Reflex) Compact Bass Reflex Enclosure: 43.2 liters (Tuning: 35 Hz) Standard Bass Reflex Enclosure: 50 liters (Tuning: 35 Hz) Installation Dimensions Overall Diameter: 318 mm Cutout Diameter: 282 mm Mounting Depth: 142 mm Overall Depth: 152 mm Magnet Diameter: 140 mm Magnet Depth: 56 mm99,66 €*Shipping: 16,50 €Secure redirect to the provider
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases. ** Note: Parts of this content were created by AI.